The purpose of pipes and fittings is to join straight pipe sections, as well as adapt them to different shapes and sizes. They can also regulate the flow and pressure of fluids. If you need to connect two sections of pipe, you can use different types of fittings. These connectors are used in construction. Below is a list listing all the available fittings. Some of these devices can be used in industrial processes, while some are used in homes or businesses.

A coupling is a piece or pipe that has a threaded connection at one or both ends. These connections are used to join steel pipes. To allow for threading, the pipe is tapered at both ends. The pipe is then coated with a thread sealant (commonly PTFE, or Teflon) to allow for threading. Once the sealant has dried, the pipe can then be screwed into the fitting. To tighten the coupling, a pipe wrench is needed.

An elbow is a fitting that changes the flow direction. Some elbows have threaded and sweaty connections, while others are capped with a flare. Street elbows are the most common type of elbow. They can have both male or female threads. There are also bends and tees. There are many options for couplings. They are essential plumbing fixtures and can transform a space from a simple bathroom into a luxurious home.

Many materials can be used for fittings and pipes. Copper is a common material used for plumbing. It comes in two types: M and L. It can also be ordered in different lengths and angles. Galvanized pipe is the last option for indoor plumbing. It is less expensive than copper, but it can also develop corrosion. They are generally not recommended for outdoor use. They are best for indoor use in homes or commercial buildings.

A wye fitting can be described as a type nipple with a curved inlet. This type of coupling can alter the size of a pipe. The wye is also known as a bell reducer. It is difficult to connect different sizes of pipes because of its shape. Nipples are the most common type of wyes. They are used to reduce the length or increase the diameter of a pipe.

The wye, which is not made of metal, is the same as the Nipple pipes. The wye can be used as a bell reducer to connect the two pipes. These reducing couplings are sometimes referred to as “bell” reducers due to their shape. They can be threaded either male or female and can be joined with a nut.

Another type of wye is a nipple coupling, which is another type of nipple. Its length and diameter are different. Two-piece nipple couplings can be used to modify the length of the pipe or connect it to another pipe. Similarly, a reducing nipple is a ring-shaped valve. They can be used for lengthening or reducing a piece of metal.

Pipes and fittings can come in many different materials. There are many options, including a tee or a nickel coupling. Each type has its uses. The nipple tee connects two pipes. A nipple nuppee is a type nipple-shaped coupling.

A nipple, a short, male-threaded pipe joining two pipes, is called a snipple. It has a 90-degree “branch”, at its center. They can be used in plumbing and hose applications. There are two types. Some are male-threaded while others are female. A nipple is a connector between two pipes.

Weldable branches fittings are a type or weldable coupling that strengthens the pipe where the hole has been made. This type of nipple can be used to connect two DWV system. There are also compression and butt-welded options. Two pipes can be connected by the tees. These tees can also be used to connect elbows.